Will a stock 3800 series II supercharger off of a Buick or montecarlo fit on my 3800 camaro?

I have a 3.8l 3800 v6 camaro and i was wondering if a 3.8l 3800 supercharger off of a side monted (front wheeldrive) car would bolt right on and if any one knows the awnser about how much hp would it addWill a stock 3800 series II supercharger off of a Buick or montecarlo fit on my 3800 camaro?according to my research Ive been doing per customer requests of the same issue. They will, but you have 2 things. first the heads I believe will be needed from the doner supercharged engine. Also keep in mind that the compression ratio and piston to valve clearance should be checked if you do the head swap. You will also need to change the ECU and maybe the harness to make it work. Or send your current ECU to Ed Wright and have reflashed or another place for that change. Im not sure on the HP/TQ but im sure it will be more than worth the swap effort. My reasoning is you can change pulleys, air %26amp; fuel ratio and timing ect. With the proper tune and that those engines make the Grand Prix GTX run some impressive times for just a FWD 4 Door Car. Also the intake on the back of the supercharger may be close to the cowl on the camaro. It will be trial and error and you wont know alot for sure until you get into the project further. from what I can tell in my research the 3.8 block is the same from 96-up so the top end should swap for sure. But just the supercharger Im not sure. All this effort it maybe worth while just to convert it into a LT1 or LS1 car!!. Something to think about! Good LuckWill a stock 3800 series II supercharger off of a Buick or montecarlo fit on my 3800 camaro?
I'd get the ECM off of the car as well and it would work for reading the air/fuel mixture and timing.

Turbo's are easier to hook up and the torque is better.Will a stock 3800 series II supercharger off of a Buick or montecarlo fit on my 3800 camaro?yes it will but the computer might reject it it is better to buy 1 for the car like on ebay or from a dealerWill a stock 3800 series II supercharger off of a Buick or montecarlo fit on my 3800 camaro?
It should if they are both series II. I have thought about doing the same thing I have not been able to find h.p. gains anywhere on the internet so I can't answer that part of the question.Will a stock 3800 series II supercharger off of a Buick or montecarlo fit on my 3800 camaro?Try the site in my link there is lots of info there. but please be polite...

How do you fix a door handle on an 88 buick lasabre? Cost?

The drivers side will not work to get into the car and i need to get it fixed.How do you fix a door handle on an 88 buick lasabre? Cost?in order for someone to help you you need to be more specific on your problem.maybe the linkage from inside the door has come loose or broken off.if so you need to take the panel off to repair. actually in order to do anything you must take the door panel off.a handle can be bought at your local junk yard.if the linkage is the problem that may also be found at the junk yard.

How is access to the backup lights on a 2003 Buick Rendexvous obtained?

the easiest way would be to go to your autoparts store and get a haynes manual for you vehicle. it will tell you how and show pictures so you know where the screws/clips areHow is access to the backup lights on a 2003 Buick Rendexvous obtained?OR...you could go here, and download a copy of your owners manual for free. They usually have that sort of thing.



https://www.mygmlink.com/main/US/en/gm/h鈥?/a>

florida drivers license

restaurants in pittsburgh

Can a sony cd player work in a 1999 century buick?

it looks like it will fit inside the dash thing, i just dnt know if its compatible.Can a sony cd player work in a 1999 century buick?If you still have the original big GM radio you will need a GM radio installation kit. Yes then it should work fine.

What size wrench will remove a battery from a 1996 Buick Skylark?

you need a 5/16 wrench for the cable's and a 13m.m. for the battery hold downWhat size wrench will remove a battery from a 1996 Buick Skylark?i have a 88 olds and i use either a 13mm or a 7/16 socket. i suppose your talking about the hold down bolt, arent you?. but for the terminals i use a battery wrench for that.What size wrench will remove a battery from a 1996 Buick Skylark?
Most batteries use 1/2 - 9/16 on battery terminals and holdd0wns.What size wrench will remove a battery from a 1996 Buick Skylark?around a 7-16th or 3-8thWhat size wrench will remove a battery from a 1996 Buick Skylark?
Specifically side-post battery terminal bolts are 6.5mm. There are special sockets made just for servicing these or you can use an adjustable wrench.What size wrench will remove a battery from a 1996 Buick Skylark?if its side terminal 5/16 if it top it could be 7/16 or 1/2

Which wheels propel a Buick Rendezvous when the all-wheel drive is out?

When it disengages does the front wheels propel the car or does the rear do the work? It is a 2006 model.Which wheels propel a Buick Rendezvous when the all-wheel drive is out?i would say the front, i've had the all wheel go out on a couple vehicles, front wheel drive was all i had leftWhich wheels propel a Buick Rendezvous when the all-wheel drive is out?It's normally a front wheel drive vehicle.Which wheels propel a Buick Rendezvous when the all-wheel drive is out?Front-wheelsWhich wheels propel a Buick Rendezvous when the all-wheel drive is out?
The front wheels.

I have a 2000 buick regal i just brought a new alternator and battery and i replaced the terminals?

on the battery cables and every other day my battery dies can someone please tell me what could be the cause of this?I have a 2000 buick regal i just brought a new alternator and battery and i replaced the terminals?You have a short somewhere in your elect system using electricity.



Your es has to be tested to find it.



Or you can do the obvious yourself, check the full length of the cables for probs like broken/missing insulation, poor conections at the non-battery ends of the cables, etc., tightness of connections @ battery, trunk light on...I have a 2000 buick regal i just brought a new alternator and battery and i replaced the terminals?starter is all that is left. make sure every thing is connected if, you did the installation.I have a 2000 buick regal i just brought a new alternator and battery and i replaced the terminals?1st thing check the new terminals are clean and tight, if they r ok take it to the shop where the work was done